#Pantatec

Managing Sticky Dust in Abrasive Blasting


Coating Failure Caused by Oil Contamination
Coating Failure Caused by Oil Contamination

In the abrasive blasting industry, effective control of dust and oil contamination is paramount for efficient operations and prolonged equipment life.

 

Dust Challenges in Abrasive Blasting

Dust and fines from abrasives contribute to accelerated wear in machinery and components. The air and particle separator, properly configured, ensures optimal energy transfer and coverage by minimizing dust and fines. “Sticky” dust, a byproduct of oily residues, presents a challenge if not efficiently removed, circulating back into the shot blasting system.

 

Impact of Oil Contamination

Ingress of oil and grease disrupts the blasting process, leading to adhesion issues for coatings. Even a slight 2% increase in dust results in up to 50% more wear on components. Swift clogging of the filtration system raises the risk of fire.

 

Residue Elimination and Operational Cleanliness

Proactively addressing oily residues is critical; additives designed for this purpose mechanically remove oil. This process ensures an oil-free abrasive mix, preventing dust and fines from adhering and optimizing cleaning efficiency.

The result: a clean abrasive mix, reducing overall surface preparation costs, maintenance, energy consumption, and downtime.

Water Penetration Test
Water Penetration Test

 

In summary, the key to a successful abrasive blasting operation lies in effectively managing dust and oil residues. Prioritizing prevention measures ensures a smooth, cost-effective, and safe blasting process.

Don’t forget, as Benjamin Franklin said: “An ounce of prevention is worth a pound of cure.’”

For more information, feel free to contact Mr. Chris Prouty : chris.prouty@winoa.com

Find the full article on MFN

Download the full article here